DCSIMG

DIY Tips

PA Photo/Thinkstockphotos

PA Photo/Thinkstockphotos

Open-plan living is all the rage, and it’s easy to see why; sociable, light, and an instant space where all the family can be together (even if they’re all busy doing different things).

So if you currently have adjacent but separate kitchen and dining rooms (or another room that could be put to better use, perhaps a small study or utility room), then creating one big kitchen-diner/family room will seem like a great way to enhance your home.

But be warned, it’s not simply a case of getting out your sledgehammer and letting the wall have it...

The first thing to establish is what sort of wall it is. Both stud-partition walls (plasterboard over a wooden frame, or lath and plaster) and partition walls (bricks or blocks) are often straightforward to remove, while main supporting walls, which are made of bricks, blocks or stone, aren’t. Stud-partition walls are very rarely load-bearing, although they can occasionally become so over time, while partition walls may or may not be load-bearing, but main supporting walls are, as they hold up the roof and rest of the house.

Load-bearing walls should never be taken down without using supports and inserting a steel beam to take the weight the wall was supporting. This type of work must be checked and signed off by a building control officer from your local council, or an approved inspector from a private company, to ensure that it complies with building regulations. Even removing non-load-bearing walls can be of concern to building control, if, for example, it would create a layout that breaks fire regulations.

To determine if a wall is holding something up, there are various things you can look at, including the floor and ceiling joists and if there’s anything above - go to www.wikihow.com/Tell-if-a-Wall-is-Load-Bearing for more information.

 

Comments

 
 

Back to the top of the page

 

X scottish independence image

Keep up-to-date with all the latest Referendum news